2 Channel/2 Out Configurable Flowmeter (20Pin)
| Output type | IEC 1 A 24V DC |
| Isolation voltage | 250V (continuous), reinforced insulation type, I/O-to-backplane, 250V (continuous), basic insulation type, I/O group-to-group |
| Voltage type of supply voltage | DC |
| Gate input voltage range | 5V ops: 4.5...5.5V DC @ 12/24V ops: 10...26.4V DC |
| On-state voltage drop, max | 0.6 Ω x current |
| Output voltage range, nom | 5V ops: 4.5...5.5V DC @ 3...20mA load per point, 12/24V ops: 10...31.2V DC @ 40mA...1 A load per point |
| Output voltage source | Customer supplied |
| Current draw | 300mA @ 5.1V, 16mA @ 24V |
| Gate input on-state current, min | 4 mA |
| Gate input on-state current, nom | 15 mA |
| Off-state leakage current, max | <300 µA @ 31.2V DC |
| Output current per point | 1 @ 10...31.2V DC @ 20mA @ 4.5...5.5V DC |
| Overload current | Electronic (<4 A) |
| Surge current | 2 A @ 50 ms, repeatable every 2s |
| Slot width | 1 |
Interfaces field sensors and actuators with the controller at local or distributed I/O stations.
Check signal type, channel count, voltage/current, isolation, terminal base and environmental requirements.
Plan adapter, power segmentation, addressing, wiring, diagnostics and channel configuration before commissioning.
Create an old-to-new I/O mapping and validate electrical characteristics and field behavior channel by channel.
DS Robotik evaluates product selection together with field conditions and system architecture, covering PLC/I/O architecture, panels, software, integration, commissioning and modernization.
Allen-Bradley 1756-CFM is part of the ControlLogix I/O Modules product family on the Chassis-Based I/O platform.
